Ring Topology Overview

This is the full topology that will be used for the labs in this section. Each section will highlight the individual nodes that are relevant to the service or protocol for that step. The Lab Guides in the Routing ATD are meant to provide example configurations with step-by-step instruction on setting up IS-IS, Segment Routing, BGP EVPN, etc. If you are already familiar with the protocols and configurations and would instead prefer to test your knowledge with only high-level direction on the steps necessary to deploy the Service Provider network, please refer to the Class Guides instead.

Topology Info

In the Ring Topology, EOS2 and EOS5 are not used and all interfaces connecting to them are disabled.