Skip to content

Deploy L3VPN Services for Customer 4

Topology

Prepare for Customer 4 Layer 3 VPN Services

  1. On all PE nodes that are connected to Customer 4 CE nodes, define VRF CUSTOMER-4.

    • Ensure IPv4 Unicast Forwarding is enabled.
    • Route-Target for import and export should be 4:4.
    • Route-Distinguisher should be [NodeID].[NodeID].[NodeID].[NodeID]:4.

  2. Place the appropriate interfaces on the PE nodes into VRF CUSTOMER-4.

Establish PE-CE peering with Customer 4

  1. Configure EOS18 and EOS19 should as BGP AS 200.

    • EOS18 should originate the following network via BGP (any method of network origination is acceptable):

      • 18.18.18.18/32

    • EOS19 should originate the following network via BGP (any method of network origination is acceptable):

      • 19.19.19.19/32

  2. Establish eBGP IPv4 Unicast peerings between Customer-4 CE and Service Provider PE devices. These peerings should be within the Customer-4 VPN (VRF).

  3. Verify reachability between Customer-4 CE devices by pinging each other’s Loopback0 interface when sourcing the pings from their own Loopback0 interface.

Success

Lab Complete!